Junkers f.13

Show us what's on the bench

Junkers f.13

Postby Uros » Wed May 20, 2020 6:27 am

Well I started another one. Hoping to do a quickbuild I didn't spend too much time in the interior. I just paited it light gray. Seats in the cabin are light tan and cockpit seats are black. I also added bits of strip styrene on the sides of cockpit to make it more intetesting. Sorry I don't have a photo as I forgot to take one.
Here is how it looks now.
Image
Image
I have some decals for Swedish machine. Oh and it will be on floats.
Image
Thanks for looking in!
Cheers!
Uros
User avatar
Uros
 
Posts: 415
Joined: Mon Aug 14, 2017 6:25 pm
Location: Slovenia

Re: Junkers f.13

Postby Uros » Mon Jun 15, 2020 5:47 am

Got some more done on this one. I replaced some of the details. I made new ones from copper wire, stretched sprue and beer can.
I need to do some touch ups and then it's ready for primer.
Image
Image
Image
I also thined the prop blades and drilled out exhaust pipe.
Image
Image
Thanks for looking in
Cheers!
Uros
User avatar
Uros
 
Posts: 415
Joined: Mon Aug 14, 2017 6:25 pm
Location: Slovenia

Re: Junkers f.13

Postby Graeme H » Mon Jun 15, 2020 11:14 am

I do like a nice Junkers, great detail work there, don't think those JBot decals are available anymore
Graeme
User avatar
Graeme H
 
Posts: 1202
Joined: Thu Jun 05, 2014 12:51 pm
Location: YBTL TSV

Re: Junkers f.13

Postby hrtpaul » Mon Jun 15, 2020 6:06 pm

Graeme H wrote:I do like a nice Junkers, great detail work there, don't think those JBot decals are available anymore

Not commercially anyways ;) ;) ;)
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot toot :twisted:
hrtpaul
 
Posts: 4115
Joined: Sat Apr 12, 2014 10:44 am
Location: Like I'm gonna tell you lot

Re: Junkers f.13

Postby F-27pax » Sat Jun 20, 2020 3:30 pm

This is coming along very nicely.
F-27pax
 
Posts: 973
Joined: Fri Apr 18, 2014 11:40 pm

Re: Junkers f.13

Postby Uros » Thu Jul 02, 2020 4:45 am

Thanks guys!
I contacted Jbot and he made me a set of decals for twin otter not too long ago. Maybe it's still possible to get decals printed from him.

Here's last progress. Paint and decals are on. I brushed a coat of future to seal them and sprayed a semigloss coat over that. Floats and prop are also painted and attached.
Image
Image
Image
Image
Just a few details are left to do and a base.

Thanks for looking in!
Cheers!
Uros
User avatar
Uros
 
Posts: 415
Joined: Mon Aug 14, 2017 6:25 pm
Location: Slovenia

Re: Junkers f.13

Postby RayS » Thu Jul 02, 2020 7:11 am

It is coming along nicely Uros, interesting advertising on the fuselage!
Ray

Image
User avatar
RayS
 
Posts: 2159
Joined: Thu Apr 17, 2014 10:24 am
Location: RAdelaide!... YPAD

Re: Junkers f.13

Postby Uros » Mon Aug 03, 2020 6:11 am

Thanks Ray. I was looking for something interesting and this is what I found.

I made the base and I bought some epoxy that can be poured 5 cm deep.
Image
This is how it will look like roughly, minus the dust.
Image
Thanks for looking in!
Cheers!
Uros
User avatar
Uros
 
Posts: 415
Joined: Mon Aug 14, 2017 6:25 pm
Location: Slovenia

Re: Junkers f.13

Postby F-27pax » Mon Aug 03, 2020 12:52 pm

Beautiful. I'm going to have to get out my thesaurus to find more superlatives to describe your work.
F-27pax
 
Posts: 973
Joined: Fri Apr 18, 2014 11:40 pm

Re: Junkers f.13

Postby Uros » Sun Sep 06, 2020 11:22 pm

Thanks F-27pax, much apreciated!

A little update. I poured epoxy. I wanted to have clear water but there were some bubbles and epoxy reacted with paint on the floats. I will spray some 2k lacquer next time. So to hide that i made ripples. It looks ok but all uderwater detail is barely wisible now. Well next one will be better.
Image
It looks a bit empty, so my friend will print me some ducks and maybe I will paint a figure too.

Thanks for looking in!
Cheers!
Uros
User avatar
Uros
 
Posts: 415
Joined: Mon Aug 14, 2017 6:25 pm
Location: Slovenia

Next

Return to Member's Works in Progress

Who is online

Users browsing this forum: No registered users and 2 guests

cron