Revell 1/144 CargoLux 747-8F on the bench

Show us what's on the bench

Re: Revell 1/144 CargoLux 747-8F on the bench

Postby TheChronicOne » Tue Mar 09, 2021 10:56 am

Wow!!! Very ambitious. I haven't been around lately so I'll say Welcome to the boards, even if I'm a couple months late doing so!!
-Sprues McDuck-
User avatar
TheChronicOne
 
Posts: 350
Joined: Tue Jun 19, 2018 10:47 am
Location: Oklahoma, U.S.A.

Re: Revell 1/144 CargoLux 747-8F on the bench

Postby Fuzznoggin » Thu Mar 11, 2021 9:26 am

Small Update but had to share. Installed the Wing Landing Gear and All Gear Doors today. Added 3 open A/C Pack exhaust doors to the belly with some thin stock styrene.
Next up, decal engine cowls, paint the leading edge flaps and install both engines an L/E flaps. Oh yes, the windshield too! Might just have this finished by the end of March :D

ImageWing Landing Gear and All Gear Doors Installed by Fuzznoggin, on Flickr

ImageWing Landing Gear and All Gear Doors Installed by Fuzznoggin, on Flickr

ImageWing Landing Gear and All Gear Doors Installed by Fuzznoggin, on Flickr

ImageWing Landing Gear and All Gear Doors Installed by Fuzznoggin, on Flickr
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: Revell 1/144 CargoLux 747-8F on the bench

Postby RayS » Sat Mar 13, 2021 8:40 am

I am loving the detail you are throwing into this Jack!
Ray

Image
User avatar
RayS
 
Posts: 2159
Joined: Thu Apr 17, 2014 10:24 am
Location: RAdelaide!... YPAD

Re: Revell 1/144 CargoLux 747-8F on the bench

Postby Fuzznoggin » Sat Mar 13, 2021 9:56 am

The engines and leading edge Variable Camber Flaps and Krueger Flaps have been installed. Took some time and a bit of trimming, but it was well worth it. Still more to go before decals are applied. It's getting there.

ImageIMG_9964 by Fuzznoggin, on Flickr

ImageIMG_9966 by Fuzznoggin, on Flickr

ImageIMG_9967 by Fuzznoggin, on Flickr

ImageIMG_9968 by Fuzznoggin, on Flickr

ImageIMG_9969 by Fuzznoggin, on Flickr

ImageIMG_9971 by Fuzznoggin, on Flickr
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: Revell 1/144 CargoLux 747-8F on the bench

Postby Fuzznoggin » Sun Mar 14, 2021 10:25 am

Well, I got even more creative today and added some "corrosion inhibiting compound" ( an enamel light rust colored wash from AK Interactive paints). Eventually I'll decal this beast and call it quits. Just another OCD moment :lol:

ImageIMG_9983 by Fuzznoggin, on Flickr

ImageIMG_9981 by Fuzznoggin, on Flickr

ImageIMG_9980 by Fuzznoggin, on Flickr
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: Revell 1/144 CargoLux 747-8F on the bench

Postby Fuzznoggin » Thu Mar 18, 2021 10:44 am

Ok, decals are complete. Some minor touch up, wiring to the base and she's done. Here's a preview before I post the final shots in the Completed Models section.

ImageIMG_0080 by Fuzznoggin, on Flickr
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: Revell 1/144 CargoLux 747-8F on the bench

Postby TheChronicOne » Thu Mar 18, 2021 2:41 pm

Brilliant!! I do like the corrosion on the slats and stuff. Looks real to me!
-Sprues McDuck-
User avatar
TheChronicOne
 
Posts: 350
Joined: Tue Jun 19, 2018 10:47 am
Location: Oklahoma, U.S.A.

Previous

Return to Member's Works in Progress

Who is online

Users browsing this forum: No registered users and 5 guests

cron