JANET Air 737 "Positive Rate - Gear Up" Scenario

Show us what's on the bench

JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby Fuzznoggin » Sat Aug 21, 2021 2:38 am

Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby Fuzznoggin » Sat Aug 21, 2021 2:46 am

Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby RayS » Sat Aug 21, 2021 4:42 pm

That looks great Jack :-), nice refurb and update. By the size of it I think it is the old Aurora kit. Airfix did not release a -100
Ray

Image
User avatar
RayS
 
Posts: 2170
Joined: Thu Apr 17, 2014 10:24 am
Location: RAdelaide!... YPAD

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby hrtpaul » Sun Aug 22, 2021 11:35 pm

That is seriously epic mate. Looks very cool indeed :)
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot toot :twisted:
hrtpaul
 
Posts: 4120
Joined: Sat Apr 12, 2014 10:44 am
Location: Like I'm gonna tell you lot

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby Fuzznoggin » Tue Aug 24, 2021 6:24 am

Landing Gear installation day. Let the mains set up, then I can install the scratch built doors and struts. Coming along! Decals arrived today. I should have this done in the next day or two; then on to the base - which everyone is gong to love!

Imagenose gear 3 by Fuzznoggin, on Flickr

Imagenose gear 2 by Fuzznoggin, on Flickr
]
Imagenose gear 1 by Fuzznoggin, on Flickr

Imagemain install 2 by Fuzznoggin, on Flickr

Imagemain install 1 by Fuzznoggin, on Flickr
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby Fuzznoggin » Tue Aug 24, 2021 10:09 am

Had to show a pic of the gear in retraction. Adhesive dried perfectly and couldn't wait to take a pic. The gear doors and down lock struts (in V shape ) get installed tomorrow. The window decals arrived from Authentic Airliners and those will go on shortly. Then on to the base graphics.

Image20210823_162941 by Fuzznoggin, on Flickr
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby Fuzznoggin » Wed Aug 25, 2021 8:41 am

Installed the main gear downlock struts & gear doors, added 3 additional vortex generators below each stabilizer, pitot tubes on vertical stabilizer, and antennas on the fuselage. Tomorrow it's decal time, pitot tubes up front, and base construction.

Image20210824_132856 by Fuzznoggin, on Flickr

Image20210824_132914 by Fuzznoggin, on Flickr

Image20210824_133009 by Fuzznoggin, on Flickr

Image20210824_132805 by Fuzznoggin, on Flickr
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby RayS » Wed Aug 25, 2021 10:26 am

looking very good Jack
Ray

Image
User avatar
RayS
 
Posts: 2170
Joined: Thu Apr 17, 2014 10:24 am
Location: RAdelaide!... YPAD

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby tor lives » Wed Aug 25, 2021 10:46 pm

Really impressive work.
This kit was also released by Monogram many moons ago.
TOR
tor lives
 
Posts: 4255
Joined: Mon Apr 14, 2014 11:01 am

Re: JANET Air 737 "Positive Rate - Gear Up" Scenario

Postby Fuzznoggin » Thu Aug 26, 2021 10:06 am

This will be the last update in the "Works in Progress". Thanks for the kind words! Next set of photos will be in "Works Completed" with it's display base.
The aircraft is pretty much completed. Window decals provided by Authentic Airliners of Germany . Engine Pratt & Whitney logos from Airline Hobby Supply in Arizona. The rest is explained on the photos. Fun build and it's dressed up a bit fancier than the stock kit. Accurate to some degree; precise far from it. But it was fun to modify and, in essence, it was a science experiment for lack of a better term. By the way, this is a -100 series. I thought about adding the 1.3" to the fuselage to convert it to a -200 (which Janet Air actually flew) but it wasn't worth the trouble. Plus the engines are, well....horrible and would need to be replaced. Figuring in all the aftermarket goodies and I'd be close to the cost of a Big Plane Kit 737. Again, it was an experiment and it'll pass for the scenario I had planned for. Now I have my practice in for the BPK 737-800 which I plan to covert to the 700 series.

Image20210825_125819 by Fuzznoggin, on Flickr

Image20210825_125738 by Fuzznoggin, on Flickr

Image20210825_125753 by Fuzznoggin, on Flickr
Last edited by Fuzznoggin on Thu Aug 26, 2021 9:19 pm, edited 1 time in total.
Current Build - Aurora 737 refurbishing to JANET Airlines
Fuzznoggin
 
Posts: 42
Joined: Mon Jan 04, 2021 1:24 am
Location: SW Florida

Next

Return to Member's Works in Progress

Who is online

Users browsing this forum: No registered users and 2 guests

cron