Hasegawa 1/48 P-51D Mustang

A place for our military aviation modellers to show their stuff. It may not be civil but it still has a home here

Hasegawa 1/48 P-51D Mustang

Postby kfutter » Sat Jan 31, 2015 5:41 pm

I built this one primarily as a test-bed for using Alclad, and as such its bling-factor has been deliberately maxed-out. I've posted a photo of it in another thread on here, so it may look familiar. The decals are from Eagle Strike, except for the red walkway markings on the flaps, which came from the kit decals (the Eagle Strike ones were both for the port side!). I kept the canopy closed because I couldn't get it to sit convincingly in the open position, but it doesn't fit all that impressively when closed either. I'm pretty happy with the way it turned out overall, despite there being a few flaws. Anyway, on with the photos!

Image

Image

Image

Image

Image

Image

Image

Thanks for looking!

Kev
kfutter
 
Posts: 442
Joined: Tue Dec 16, 2014 3:42 pm

Re: Hasegawa 1/48 P-51D Mustang

Postby hrtpaul » Sun Feb 01, 2015 10:25 am

That's gorgeous mate. I have 5 x 78th FG P-51's to do including Big Beautiful Doll. I have some Tamiya kits stashed for these planes. How was the fit of the checker decals on the nose? Once again Kev lovely work :)
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot toot :twisted:
hrtpaul
 
Posts: 4121
Joined: Sat Apr 12, 2014 10:44 am
Location: Like I'm gonna tell you lot

Re: Hasegawa 1/48 P-51D Mustang

Postby kfutter » Sun Feb 01, 2015 10:36 am

Thanks Paul. The decals are actually designed for the Tamiya kit, which by the looks of things is a bit narrower around the nose:

Image

I had to mask and spray the missing chequers, and if you look closely, you can actually see that the white is different:

Image

Plus, it didn't fit well around the chin intake, but I left that alone.

Kev
kfutter
 
Posts: 442
Joined: Tue Dec 16, 2014 3:42 pm

Re: Hasegawa 1/48 P-51D Mustang

Postby tor lives » Sun Feb 01, 2015 10:57 am

That is one dam fine Mustang!!!.....nice job Kev.
1:48 :shock: ....you are normally a 1:32 man arn't you???
TOR
tor lives
 
Posts: 4255
Joined: Mon Apr 14, 2014 11:01 am

Re: Hasegawa 1/48 P-51D Mustang

Postby kfutter » Sun Feb 01, 2015 11:10 am

Thanks Ray. I'm all over the shop, really. Especially on a Wednesday. I like to use 1/48 kits to practice new techniques on, or as a test-bed for new products. In this case, it was Alclad. I'm just finishing up Tamiya's ancient 1/48 Rufe kit, upon which I inflicted the new IJN paints from AK Interactive, as well as their Paneliner range. I'll post it up when it's done.

Kev
kfutter
 
Posts: 442
Joined: Tue Dec 16, 2014 3:42 pm

Re: Hasegawa 1/48 P-51D Mustang

Postby Wedgetail » Mon Feb 09, 2015 11:21 am

Very nice Kev. I'd say you and Alclad are getting on just fine judging by your Mustang.
Also great to see a 78th FG bird in markings other than 'The Doll' for a change.
Cheers
Wayne
Wedgetail
 
Posts: 335
Joined: Sat May 03, 2014 11:58 am

Re: Hasegawa 1/48 P-51D Mustang

Postby kfutter » Mon Feb 09, 2015 12:56 pm

Wedgetail wrote:Very nice Kev. I'd say you and Alclad are getting on just fine judging by your Mustang.
Also great to see a 78th FG bird in markings other than 'The Doll' for a change.
Cheers
Wayne


Thanks Wayne!

Kev
kfutter
 
Posts: 442
Joined: Tue Dec 16, 2014 3:42 pm


Return to The Air Base

Who is online

Users browsing this forum: No registered users and 10 guests

cron