Hawkeye Models - IPEC Argosy

A place for sponsors and other manufacturers to advise A/CAMers of the "good stuff" to come

Hawkeye Models - IPEC Argosy

Postby scotty100368 » Thu Dec 13, 2018 9:37 pm

Hi folks!

This long promised subject is just about ready. Final test-fit for 1/72 is done (1/144 will follow soon) and Peter Mahoney now has the files.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

After some extensive research, I've included all rego's, ship names (and typefaces) and livery variations that I could find.

I would (modestly) say it should be a significant improvement over the Mach 2 decal...

Cheers!
Scott
CBR Ramp
scotty100368
 
Posts: 273
Joined: Mon Apr 14, 2014 8:46 pm
Location: Queanbeyan, NSW

Re: Hawkeye Models - IPEC Argosy

Postby F-27pax » Fri Dec 14, 2018 8:54 am

This is very welcome news. I have a couple of 1/144 kits that have been waiting for these decals. They look very detailed and well researched. Thanks.
Leigh
F-27pax
 
Posts: 849
Joined: Fri Apr 18, 2014 11:40 pm

Re: Hawkeye Models - IPEC Argosy

Postby RayS » Fri Dec 14, 2018 12:20 pm

I was in two minds about doing an Ipec Argosy, I have the BEA boxing which fits this scheme perfectly.

Nice work there, I might have to have a chat with Pete about a sheet....
Ray

ImageImage
User avatar
RayS
 
Posts: 1708
Joined: Thu Apr 17, 2014 10:24 am
Location: The Bush Capital... YSCB

Re: Hawkeye Models - IPEC Argosy

Postby Cap'n Wannabe » Mon Dec 17, 2018 4:00 pm

I'd be interested in the 1/144 set...when do you expect to release them?
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1317
Joined: Mon Apr 14, 2014 6:00 pm
Location: Aberfeldie, Victoria

Re: Hawkeye Models - IPEC Argosy

Postby scotty100368 » Mon Dec 17, 2018 4:39 pm

Cap'n Wannabe wrote:I'd be interested in the 1/144 set...when do you expect to release them?


I still have to do test-fitting and tweaking over the Xmas break, so early January at best. :)
Scott
CBR Ramp
scotty100368
 
Posts: 273
Joined: Mon Apr 14, 2014 8:46 pm
Location: Queanbeyan, NSW


Return to Product Announcements

Who is online

Users browsing this forum: No registered users and 2 guests