Been a bit preoccupied lately for making updates so here is one.
I was not happy with the way the clear inserts settled so I pulled off the masking and puttied and sanded them.
Remasked and they looked a lot better
![Image](https://farm5.staticflickr.com/4648/24758242007_42deaed71b_o.jpg)
Attempt 2 at masking and spraying the cheat line in progress
![Image](https://farm5.staticflickr.com/4677/24758241767_97efbaea42_o.jpg)
Also masked and sprayed the float 'wells'
![Image](https://farm5.staticflickr.com/4711/38730142605_e35669114e_o.jpg)
![Image](https://farm5.staticflickr.com/4704/24758241537_11eaa4bef8_o.jpg)
Might run a wash in there to dirty it up a bit.
The hull also got a spray, last one I hope
![Image](https://farm5.staticflickr.com/4669/38730142325_938c22ef5b_o.jpg)
I used Tamiya chrome silver which I will dirty up with some dry brushing I think
Everything masked for the hull spray
![Image](https://farm5.staticflickr.com/4668/24758241387_3c97537783_o.jpg)
and the masking is off
![Image](https://farm5.staticflickr.com/4624/38730142165_d8460bf629_o.jpg)
![Image](https://farm5.staticflickr.com/4710/38730142355_25b2b81cc5_o.jpg)
Some touchups to do followed by the decals
Finally, I could not resist a test fit of the major assemblies, still have the install the wing supports when the wings go on
![Image](https://farm5.staticflickr.com/4743/39596972272_4bd2be2660_o.jpg)
![Image](https://farm5.staticflickr.com/4704/38730141975_f5473651da_o.jpg)
![Image](https://farm5.staticflickr.com/4607/39596971992_2052422955_o.jpg)
and the props need some paint as well