Junkers f.13

[Uros]

Well I started another one. Hoping to do a quickbuild I didn't spend too much time in the interior. I just paited it light gray. Seats in the cabin are light tan and cockpit seats are black. I also added bits of strip styrene on the sides of cockpit to make it more intetesting. Sorry I don't have a photo as I forgot to take one.
Here is how it looks now.


I have some decals for Swedish machine. Oh and it will be on floats.

Thanks for looking in!

[Uros]

Got some more done on this one. I replaced some of the details. I made new ones from copper wire, stretched sprue and beer can.
I need to do some touch ups and then it's ready for primer.



I also thined the prop blades and drilled out exhaust pipe.


Thanks for looking in

[Graeme H]

I do like a nice Junkers, great detail work there, don't think those JBot decals are available anymore

[hrtpaul]

I do like a nice Junkers, great detail work there, don't think those JBot decals are available anymore

Not commercially anyways

[F-27pax]

This is coming along very nicely.

[Uros]

Thanks guys!
I contacted Jbot and he made me a set of decals for twin otter not too long ago. Maybe it's still possible to get decals printed from him.

Here's last progress. Paint and decals are on. I brushed a coat of future to seal them and sprayed a semigloss coat over that. Floats and prop are also painted and attached.




Just a few details are left to do and a base.

Thanks for looking in!

[RayS]

It is coming along nicely Uros, interesting advertising on the fuselage!

[Uros]

Thanks Ray. I was looking for something interesting and this is what I found.

I made the base and I bought some epoxy that can be poured 5 cm deep.

This is how it will look like roughly, minus the dust.

Thanks for looking in!

[F-27pax]

Beautiful. I'm going to have to get out my thesaurus to find more superlatives to describe your work.

[Uros]

Thanks F-27pax, much apreciated!

A little update. I poured epoxy. I wanted to have clear water but there were some bubbles and epoxy reacted with paint on the floats. I will spray some 2k lacquer next time. So to hide that i made ripples. It looks ok but all uderwater detail is barely wisible now. Well next one will be better.

It looks a bit empty, so my friend will print me some ducks and maybe I will paint a figure too.

Thanks for looking in!